Seeed Studio Grove System

Connecting the Base Shield to the ASC

Connect the Base Shield to the Propeller ASC as shown in the photos. (Shown with optional RGB adapter between.)

dscf6794s.jpg dscf6795s.jpg dscf6802s.jpg

Connecting twigs to the base shield will follow the same procedures as with an Arduino. See the Seeed Studio wiki for info.

Use the SPIN / PASM driver for MCP3208 Analog to Digital converter to use analog twigs such as the temperature and rotary twigs. (ADC 6 & 7 is not available)

Twig compatibility chart

Twig Bypass Jumper Direction Code Examples Twig Bypass Jumper Direction Code Examples
Rotary
gbrot.jpg
Open INPUT Code Button
bgpushb1.jpg
Open INPUT Code
Relay
p3222472.jpg
Either OUTPUT Code Tilt
gbtlt.jpg
Open INPUT Code
LED
p2100717.jpg
Closed OUTPUT Code Temperature
bgtemp1.jpg
Open INPUT Code
Buzzer
gbbuz.jpg
Closed OUTPUT Code LCD
ASCII���FAN
???? OUTPUT Code
asc/grove/start.txt · Last modified: 2013/04/26 00:24 (external edit)
 
Recent changes RSS feed Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki